品牌
*注：按产品型号，可检索常见问答、样本、证书等信息。
Couplers
Type: KF-4-F
Coupler KF-4-F is used to combine two or three antennas into one output.
It is used only indoor, usually in the attic, near antennas.
It can be mounted on the beam (two kniping screws are attached) or wall (screws not supplied).
Coupler KF-4-F is packed into polybag with hanging carton.
KF-4-F
5-69, UHF
- No. of inputs: 2
- Input 1: Ch. 5-69 ; 147-862 MHz
- Input 2: Ch. 21-69 ; 470-862 MHz
- Input 3: -
- Impedance connections: 75 Ohm ; F female
- Insertion loss: 2,5 dB
KF-4-F
UHF, UHF, VHF
- No. of inputs: 3
- Input 1: Ch. 21-69 ; 470-862 MHz
- Input 2: Ch. 21-69 ; 470-862 MHz
- Input 3: Ch. 5-12 ; 174-230 MHz
- Impedance connections: 75 Ohm ; F ženski
- Insertion loss: 2,5 dB
KF-4-F
UHF, UHF
- No. of inputs: 2
- Input 1: Ch. 21-69 ; 470-862 MHz
- Input 2: Ch. 21-69 ; 470-862 MHz
- Input 3: -
- Impedance connections: 75 Ohm ; F ženski
- Insertion loss: 2,5 dB
KF-4-F
UHF, VHF
- No. of inputs: 2
- Input 1: Ch. 21-69 ; 470-862 MHz
- Input 2: Ch. 5-12 ; 174-230 MHz
- Input 3: -
- Impedance connections: 75 Ohm ; F ženski
- Insertion loss: 2,5 dB
Coupler KF-4-F with two inputs
Coupler KF-4-F with three inputs
Type: KR-F UHF, UHF
Antenna coupler is suitable to combined two antennas into one output.
It can be mounted into mast (PVC strip included), beam or wall (mounting material not included).
It is used for outdoor or indoor use.
- Input 1: UHF (470-870 MHz)
- Input 2: UHF (470-870 MHz), with power pass
- Impedance: 75 Ohm
- Connectors: 3 x »F« type female connector
Type: KR-F VHF, UHF, UHF+
Antenna coupler is suitable to combined three antennas into one output.
It can be mounted into mast (PVC strip included), beam or wall (mounting material not included).
It is used for outdoor or indoor use.
- Input 1: VHF (5-300 MHz)
- Input 2: UHF (470-870 MHz)
- Input 3: UHF (470-870 MHz), with power pass
- Impedance: 75 Ohm
- Connectors: 4 x »F« type female connecto
Type: KR-F UHF, UHF, UHF+
Antenna coupler is suitable to combined three antennas into one output.
It can be mounted into mast (PVC strip included), beam or wall (mounting material not included).
It is used for outdoor or indoor use.
- Input 1: UHF (470-870 MHz)
- Input 2: UHF (470-870 MHz)
- Input 3: UHF (470-870 MHz), with power pass
- Impedance: 75 Ohm
- Connectors: 4 x »F« type female connecto
工程咨询
数据中心
采油平台
发电厂
核电厂
输配电
政府及军事设施
冶金矿业
制造业
可再生能源
铁路运输系统
